ŁADOWARKA VICTRON ENERGY BLUE SMART CHARGER

APP ANDROIDAPP IOS

Management by phone.

The Victron Energy charger is a fully computerised device with a built-in BlueTooth interface and allows management via a smartphone. In the Victron Connect app, you can read the current voltage, current and charging status the battery is in.

High efficiency

With up to 94% efficiency, the chargers generate up to four times less heat compared to industry standards, and once the battery is fully charged, power consumption drops to 0.5W, approximately five to ten times more than standard chargers from other manufacturers.

Advanced charging algorithm

Adaptive 6-stage charging algorithm: test -bulk -absorption-regeneration -rest

- storage. The Blue Smart Charger features microprocessor-controlled 'adaptive' battery management. The adaptive function will automatically optimise the charging process depending on how the battery is used

Storage/storage mode

This is less maintenance and ageing when the battery is not in use. Storage mode activates when the battery has not been discharged in 24 hours. In storage mode, the holding voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week, the voltage is raised back to the absorption level to 'equalise' the battery. This feature prevents electrolyte delamination and sulphation, a major cause of early battery failure.

Charging LiFePO4 batteries

The charger also supports LiFePO4 lithium iron phosphate batteries. All you need to do is select this battery type using the button on the housing.

Protection against overheating

Overheating protection The output current will decrease as the temperature rises to 50 ° C, but the Blue Smart Charger will not be disconnected.